| 1. | Forget to put the locating screw in lifting wheel
忘装吊轮上的定位螺丝。 |
| 2. | Note : the dust in lifting wheel should be cleared
注意要清除吊轨里的灰尘 |
| 3. | Heavy - medium inclined lifting wheel separator
斜轮重介质选煤机 |
| 4. | Assemble door frame . put lifting wheel into lifting rail first
组装门框，注意要先把吊轮放入吊轨。 |
| 5. | Hang door sheet and install the localization screw on the lifting wheel
7挂门钰并安装吊轮上的定位螺丝。 |
| 6. | Hang door sheet to adjust every level the screw in lifting wheel is adjustable . . check the lock and push the door to make sure it is slippery
挂门钰调整各门钰的水平吊轮上有螺丝可调节，检查锁具能否锁上，趟动门钰感觉是否顺滑。 |
| 7. | The main reason is as follows : dust in lifting rail is not removed clean ; lifting rail is not at a level ; the installation of low locator is not correct ; regulate screw in lifting wheel regulates too high
趟动门钰感觉不顾滑，主要原因有：吊轨里的灰尘没清除干净吊轨不够水平下定位安装不准确和吊轮调节螺丝调节过高造成。 |
